Press GPIB Address to change the address of the
681XXC on the bus. Enter 19 using the cursor con-
trol key or the data entry keypad and the termina-
tor key
HZ
ms
ADRS
The new GPIB address (19) will appear on the dis-
play.
Press More to go to the First Additional Configure
GPIB menu (below).
At this menu, press More to go to the Second Addi-
tonal Configure GPIB menu (below).
Press 8757D Scalar to enable the 8757D Scalar
GPIB mode. When enabled, the 681XXC will shift to
the analog sweep frequency mode sweeping at the
full range of the instrument.
7-18 681XXC OM
USE WITH USE WITH A HP8757D
OTHER INSTRUMENTS SCALAR NETWORK ANALYZER