Use the cursor control key to select a frequency
parameter from the marker list. The selected fre-
quency parameter is highlighted in reverse video
and displayed in full below the marker list.
Editing a Marker List Frequency
If you want to change a selected marker list fre-
quency parameter’s value, press Edit to open the
frequency parameter,then edit the current fre-
quency or enter a new frequency.
Tagginga Marker List Frequency
Only frequencies on the marker list that have been
tagged can be output as markers during a sweep.
Press Tag to tag a selected frequency parameter
(place an min front of it). If a frequency parameter
is already tagged, pressing Tag will untag it (re-
move the m).
Activating Markers
The soft-keys VideoMarkers and Intensity Markers
toggle the markers on and off.
VideoMarkers–To output the tagged marker fre-
quencies as video markers during an analog or step
sweep, press VideoMarkers . Video markers will be
displayed on the CRT for all tagged marker frequen-
cies that are within the sweep frequency range.
Intensity Markers–(only available in analog sweep
frequency mode) Tooutput the tagged marker fre-
quencies as intensity markers during an analog
sweep, press Intensity Markers . Intensity markers
will be displayed on the CRT for all tagged marker
frequencies that are within the analog sweep fre-
quency range.
Press Previous Menu to return to the Sweep Fre-
quency Control Menu display.
681XXC OM 3-37LOCAL (FRONT SWEEP FREQUENCY
PANEL) OPERATION OPERATION