Asante Technologies 6000 Series Menu Description Configuration, Identify, IPAgent, SwAgentSW

5

Menus

This chapter describes each management menu on the IntraStack 6000 Series’s Device Page.

The table below provides a brief description of each menu; the sections that follow explain each menu in detail.

	Table 5-1 Device Page Menu Descriptions
Menu	Description
Configuration	Title for the submenus listed below it; this menu cannot be
	selected. See “Configuration” on page 5-4.
Identify	Allows you to view and configure device identification
	information. See “Identify” on page 5-4.
Agent	Allows you to view agent information. Also allows you to
	configure the device’s image load mode, remote boot infor-
	mation, and out-of-band dial string and baud rate. See
	“Agent” on page 5-5.
IPAgent	Allows you to view and configure the IP address, default
	gateway, and boot server address for the device. Also
	allows you to set the Telnet idle time-out period. See
	“IPAgent” on page 5-7.
swAgentSW	Allows you to view and configure the information needed
	for downloading a new image file or configuration file. Also
	allows you to enable or disable the Spanning Tree Protocol.
	See “swAgentSW” on page 5-9.
swAgentHW	Allows you to view hardware information on the device’s
	SNMP agent (such as DRAM and EEPROM size). See
	“swAgentHW” on page 5-11.
swBasic	Allows you to view basic information (such as the back-
	plane type and group capacity) on the device or a particular
	group. See “swBasic” on page 5-12.

Page 5-1