Asante Technologies 6000 Series user manual Performing a Software Upgrade, Click swAgentSW

Click Agent.

The Agent Information table appears.

Management

Performing a Software Upgrade

An IntraStack’s software image file can be upgraded via IntraSpection.

To upgrade an IntraStack’s software image file requires two steps:

❏Set up the IntraStack 6014DSB’s boot information.

❏Configure the image file information.

Set up the Boot Information

To set up the IntraStack 6014DSB’s boot information:

1

2 Open the Image Load Mode drop-down menu and select netBoot.

This sets the IntraStack 6014DSB to boot (download its soft- ware) over the network from a remote server.

3 Open the Protocol drop-down menu and select bootp-tftpor tftp.

4

5

This sets the IntraStack to download the software image file through TFTP (trivial transfer file protocol).

Click once in the File field and type the name and network path of the software image file.

Click Apply.

The IntraStack’s boot information is configured. Next, con- figure the image file information following the instructions below.

Configure the Image File Information

1 Click swAgentSW.

The Switch Agent Software Group table appears, similar to Figure 4-14.

Page 4-20