Asante Technologies 6000 Series user manual SwAgentSW

swAgentSW

swAgentSW

This menu displays configurable and read-only software information for the device’s SNMP agent. It allows you to download a new image file or configuration file and enable or disable the Spanning Tree Protocol.

Table 5-5 describes each field in the swAgentSW menu.

ΔNote: For instructions on using this menu, see “Per- forming a Software Upgrade” on page 4-20 and “Down- loading a Configuration File” on page 4-23.

	Table 5-5 swAgentSW Menu
Field	Description
Up/Download	Configurable field; displays the agent’s current
Action	uploading or downloading action (for either the con-
	figuration file or the image file).
	❏ off — the agent is not in the up/download
	mode.
	❏ Download — the agent is in the downloading
	mode.
	❏ Upload — the agent is in the uploading mode
	(this action is only for the configuration file).
Up/Download	Read-only field; displays the agent’s last uploading or
Status	downloading action (for either the configuration file
	or the image file).
	❏ Action-Success— the up/download was suc-
	cessful.
	❏ Action-Failure— the up/download failed.
	❏ In-Progress— up/download is in progress.
	❏ No-Action— no up/download was attempted.
Download File	Configurable field; determines which file (either the
	configuration file or image file) to be downloaded.
Config Server	Configurable field; determines the IP address of the
	configuration file server. This IP address is specific for
	the configuration file up/download server.
Config FileName	Configurable field; determines the name and network
	path of the device configuration file.
Config Retires	Configurable field; determines the number of
	attempts that will be made for downloading the con-
	figuration file.

Page 5-9