7.6 Changing Function Key Labels
You can replace the default label shown for any function key with you own custom label of up to 13 characters.
1.To exit any other mode, press 
EXIT and then press 
Label.
·
Edit allows you replace the current labels, see the steps below.
·
Inspect displays the default labels.
·
Restore replaces any custom labels with the default labels.
·
Done exits the button labelling options.
2.Press 
Edit.
3.Select the function key whose label you wish to change.
4.Begin entering the New Label text using the phone keypad:
·Each number key is marked with the letters it provides. You may have to press the key more than once depending on the character required. For example, the key 6 is also marked as M, N and O. To enter an O, re- press the 6 key until an O is displayed.
·If the next character you want is on another key, simply key the next character.
·If the next character you want to enter is on the same key just used, press 
to move the cursor right and then enter the character.
·Press * once enters a . (period). Pressing it twice enters a * (asterix).
·Press # once enters a - (dash). Pressing it twice enters a # (hash).
·By default the first letter entered and the first letter after any space are entered in
character are entered in 
Case.
·To enter a space, press 
Space.
·To move the cursor one space right, press 
.
·If you make a mistake, press 
Backspace to delete the character to the left of the cursor.
·If you have made a mistake in the middle of a character string and do not wish to backspace and 
to step back to one character before the point where you wish to edit. Either insert the new
character or press 
Backspace to delete the character to the left of the cursor.
·To delete all the current text, press 
Clear.
5.When the new name is set as required, press 
Save. To return to the label options screen without saving the
changes, press 
Cancel.
6.Select another button to 
Done.
2420/5420 Phone | Page 54 |
IP Office |
