Requirements | 3 |
| |
|
|
|
|
Introduction
The 4600 Series IP Telephones use Internet Protocol (IP) technology with Ethernet line interfaces. The IP telephones supplement the existing DEFINITY® /MultiVantageTM IP Solutions platform. This feature provides the user with the capability to natively administer and maintain the new 4600 Series IP Telephones.
The 4600 Series IP Telephones provide support for DHCP and TFTP over IPv4/UDP which enhance the administration and servicing of the phones. These phones use DHCP to obtain dynamic IP addresses and TFTP to download new versions of software for the phones.
The 4600 Series IP Telephones provide the ability to have one connection on the desktop for both the telephone set and the PC using the telephone’s
Hardware Requirements
Before plugging in the 4600 Series IP Telephone, verify that all of the following requirements have been met. Failure to do so will prevent the telephone from working and may have a negative impact on your network.
The following hardware is required for 4600 Series IP Telephones to work properly.
■The DEFINITY® switch must be installed and administered correctly, with Release 8.4 or later.
—DEFINITY® Release 8.4 supports the 4612 and 4624 IP Telephones.
—DEFINITY® Release 9 and later support the 4606, 4612, and 4624 IP Telephones.
—DEFINITY® Release 10 and later support the 4630 IP Telephone.
—MultiVantageTM Release 11 supports the 4602 and 4620 IP Telephones.
Introduction