Axis Communications 2120 user manual Assembling Your Camera, Checking the Hardware Inventory

10 Assembling Your Camera AXIS 2120 User’s Manual

Assembling Your Camera

The information provided in this section will assist you in unpacking and assembling the product correctly. Once assembled, you are then ready to install and configure your product, as described in the following sections of this document.

Checking the Hardware Inventory

Unpack and check all the items against the itemized list below. You should contact your dealer immediately if you find anything is missing or damaged.

Item	Title/Variants	Part Numbers
Network Camera	AXIS 2120 50 HZ (without power supply)	0126-001-01
	AXIS 2120 50 HZ Europe	0126-002-01
	AXIS 2120 50 HZ UK	0126-003-01
	AXIS 2120 50 HZ Australia	0126-006-01
	AXIS 2120 60 HZ (without power supply)	0126-011-01
	AXIS 2120 60 HZ Europe	0126-012-01
	AXIS 2120 60 HZ US	0126-014-01
	AXIS 2120 60 HZ Japan	0126-015-01
	AXIS 2120 60 HZ Australia	0126-016-01
Null Modem Cable	-	16954
Mounting Assembly	-	15104
	Europe	14233
	UK	14234
Power Supply (PS-D)	Australia	14255
	USA	14253
	Japan	14254
PS-D Extension Cable	3.3 meter	15187
Printed Materials	AXIS 2120 Installation Guide v1.0 (or later)	17618
	Product Warranty Document	18489
Disk Media	AXIS Network Camera CD v1.2 (or later)	-

Important!

To accommodate the different power supply frequencies found in the USA and Europe, the AXIS 2120 is available in 60Hz and 50Hz variants.

The 60Hz variant delivers a resolution of 525 lines of at 60 half-frames per second and is suitable for use in the United States; whereas the 50Hz variant delivers 625 lines at 50 half-frames per second and is appropriate for use in Europe.