Axis Communications Axis 2120 User’s Manual Installing Your Camera on a Network, Next section

AXIS 2120 User’s Manual Installing Your Camera on a Network 13

You will now see ‘Request timed out...’ messages repeatedly returned in the window.

Notes: •In Windows you can find out the IP address of your workstation by running winipcfg (Win 95/98/ME) or ipconfig (Win NT/2000) from the command line.

•See also Other IP Setup Methods, on page 59.

❸Connect an Ethernet cable to your AXIS 2120 and attach it to the network.

❹Attach the external Power Supply to the unit and connect it to your local mains supply.

❺Approximately 10-15 seconds after connecting the power sup- ply, the message ‘Reply from 172.21.1.200...’ - or similar, is returned in the Command Prompt. Ensure that the Power Indicator is permanently lit and that the Network Indicator flashes intermittently.

❻Exit ping. The installation is complete, and you are now ready to access the AXIS 2120 from your Web browser, as described in the

next section. Power Indicator Network Indicator