Axis Communications 2120 user manual Refining the Dial-up Networking Properties

AXIS 2120 User’s Manual Installing Your Camera to a Modem 19

Refining the Dial-up Networking Properties

Having created the dial-up connection for your AXIS 2120, follow the steps below to refine the connection properties:

❶From the dial-up networking dialog, right-click the dedicated dial-up connection previously created for your camera (AxisCamera was the connection used in this and previous examples). Select Properties.

❷Click the Server Types tab. From the drop-down list, select PPP as the Type of Dial-Up Server.

❸In the Advanced options field, check Enable software compression. All other checkboxes should remain unchecked.

❹In the Allowed network protocols field, check the TCP/IP checkbox. The NetBEUI and IPX/SPX checkboxes should remain unchecked.

❺Click TCP/IP settings and then check the Server assigned IP address, and Server assigned name server addresses radio buttons.

❻Check the Use IP header compres- sion and Use default gateway on a remote network checkboxes. Click OK.

❼Click the Scripting tag and ensure that the Start ter- minal screen minimized checkbox is checked. Click OK to exit Dial-Up Networking Properties.