Baldor AE10 Appendix C Series AE11, Operator Panel Configuration Figure C-1 AE11 Operator Panel

Appendix C

Series AE11

Information in this Appendix applies to the AE11 Generator.

Operator Panel Configuration

Figure C-1 AE11 Operator Panel

Under Speed Shutdown

Over Speed Shutdown

High Coolant Temperature Shutdown

Low Oil Pressure Shutdown

Alternator Charge Failure Warning

Failure to Start Shutdown

Aux1 Input Warn/Shutdown

Aux2 Input Warn/Shutdown

Stop Manual	Auto	Hour Meter
Run	Start	(fuel solenoid energized

Shutdown Warning Indicators

Low Oil Pressure, High Coolant Temperature, Over Speed (Engine), Under Speed (Engine), Failure to Start Engine.

Warning (or Shutdown) Indicators

Alternator Failure (to Charge Battery), Auxiliary 1 Input Active, Auxiliary 2 Input Active.

Hour Meter	Displays total hours of operation based on power applied to Fuel Solenoid).
Stop	Stops the Engine and generator set.
Manual Run	Immediately energizes the crank cycle to start the generator set and produce power.
Auto Start	The engine can only be started by making a connection across the remote start terminals of the
	control box. This allows normal automatic backup operation of the Generator Set under control of
	the Transfer Switch whenever utility AC power is lost.

MN2415 Series AE11 C-1