Place in 8000i System

Primarily to display the 8000i software from a Northstar 8000i Black Box Processor. The 15" Monitor may also be used to display the video output of a PC or compatible video source, composite, S-video and DVI video sources.

Other parts required

For connecting to external 3rd party video sources, order the following cables

VGA DB15 Video cable 6 ft (2 m)

NS004710

 

 

Composite Video cable 6 ft (2 m)

NS004803

 

 

DVI-D Video cable 6 ft (2 m)

NS004805

S-Video cable 6 ft (2 m)

NS004804

 

 

Other Functions

The 15" Display has 2 x VGA inputs, 1 x DVI connector, 2 x composite video inputs, 2 x S-video inputs. Internal 2 Port USB Hub. It may also control the power state of a Northstar Black Box Processor

Location Guide

The 15" Display is sunlight viewable, with an anti reflective coating. For best results position out of direct sunlight. The ideal location should have minimal glare from windows or bright objects. The unit is waterproof to IPX5 specification.

If connecting to the USB port of a Black Box Processor, mount no further than a 16.5 ft (5 m) cable run: mount any USB peripherals no further than 16.5 ft (5 m) away

Mounting

The unit can be flush mounted or mounted on a third party VESA bracket using the holes in the rear of the case.

Power requirements

 

Operation Voltage (once

10 V - 35 V DC

powered)

 

 

 

Operation Voltage less than

7 V - 9 V DC

1 min

 

 

 

Power consumption @12 V

60 W

 

 

Fuse

10 Amp @12 V DC (5 Amp @ 24 V DC)

 

 

Northstar 8000i System - 12" Display Processor Installation Manual

18

Page 18
Image 18
Belkin 8000I installation manual Other parts required