Manuals
/
Brands
/
Marine Equipment
/
Boating Equipment
/
Belkin
/
Marine Equipment
/
Boating Equipment
Belkin
8000I
- page 61
1
61
88
88
Download
88 pages, 1.3 Mb
61
Northstar 8000i System -12" Display Processor Installation Manual
9.4
Full System
Contents
Main
1 Preface
1.1 Important Safety Information
Page
1.2 Disclaimer
1.3 Warranty
Contents
1 Preface 2
7 Mounting the 8000i 12 inch Display Processor 33 8 Wiring Guidelines 37
9 Example System Layouts 56
10 Northstar 8000i Initial Setup 63
11 Maintenance 81
12 Restore 82
13 Upgrading the 8000i system 83
14 Specifications 86
2 Introducing the Northstar 8000i System
3 Check the 12 inch Display Processor parts
Page
Page
4 Find your way around the 12 inch Display Processor
Page
5 The Network Master Unit
6 8000i System Installation
Installation Sequence Summary Guidelines
6.1 Northstar 8000i 12 inch Display Processor
6.2 Northstar 8000i Black Box Processor
6.3 Northstar 8000i 15 inch Monitor
Page
6.4 Northstar 8000i Network Radar
6.5 Northstar 8000i 8 Port Network Linker
6.6 Northstar 8000i 4 Port USB Hub
6.7 Northstar 8000i 1 kW Network Sounder
6.8 Northstar 8000i DVD-CD Player
6.9 Northstar 8000i Remote Keypad
6.10 Northstar 8000i Video Interface
6.11 Northstar 8000i C-MAP Chart License Key
6.12 Northstar GPS Antenna (NS004743)
6.13 Other Components
6.13.1 Autopilot
6.13.2 Heading Sensor
6.13.3 Audio
6.13.4 NMEA-0183 Data
Page
6.13.5 Mass Storage Devices
6.13.6 Human Interface Devices
6.13.7 Network Camera
7 Mounting the 8000i 12 inch Display Processor
Page
Page
Page
8 Wiring Guidelines
8.1 Power
Page
8.2 GPS Port
8.3 Utility Port
8.3.1 External Wake Up and Remote Power On
Page
Page
8.3.2 NMEA
8.3.3 NMEA Multiplexer (Noland NM42)
Procedure
Page
Connect the following;
8.3.4 External Alarm
Page
8.4 USB
8.5 Auxiliary port
8.6 RGB port
8.7 Network
Page
8.7.1 Field Terminated Network Cable
Page
Terminating a Northstar 8000i RJ45 Field Kit
Page
9 Example System Layouts
9.1 8000i Chart Plotter
Page
Page
Page
Page
Page
Page
10 Northstar 8000i Initial Setup
10.1 Turn on the 12 inch Display Processor
10.2 Adjust the brightness on a 12 inch Display Processor
To adjust the backlight brightness
10.3 Set the network master unit
To set the master
10.4 Install the chart data
Install Charts interface
To install chart collections
To install all collections:
To install a selected collection:
10.5 Turn off the 12 inch Display Processor
10.6 Set the system preferences
10.6.1 Select the time format
To select the time format:
10.6.2 Select your time zone
To select your time zone:
To change the transducer depth:
10.6.5 Turn the keypad backlight on or off
To turn the backlight on or off:
10.6.6 Show/hide the top control bar
To show or hide the top control bar:
10.7 Specify your vessel statistics
To specify your vessel statistics:
10.8 Set the location of the media library
To set the location of the media library:
10.9 Set NMEA Output To select NMEA Output sentences:
10.10 Set NMEA Baud Rate
To select NMEA Output sentences:
10.11 Calibrate the touch screen
To calibrate the touch screen:
10.12 Set the device (processor) name
10.13 Set the screen resolution
To set the screen resolution:
10.14 Set the units
10.14.1 Select the speed units
To select the speed units:
To select the volume units for liquids:
10.14.5 Select the large scale distance units
To select the large scale distance units:
10.14.6 Select the small scale distance units
To select the small scale distance units:
To select the temperature units:
10.15 Radar
10.15.1 Set up the radar before using it for the first time
To set up the radar before using it:
10.15.2 Change the radar startup mode
To change the radar startup mode:
10.15.3 Change the radar range offset (trigger delay)
To change the radar range offset:
10.15.4 Change the radar bearing alignment
To change the radar bearing alignment:
10.15.5 Change the parking angle
To change the parking angle:
10.16 Sounder
10.16.1 Change the water temperature offset
To change the offset for the water temperature:
10.16.2 Change the water temperature averaging time
To change the water temperature averaging time:
10.17 Instruments
10.17.1 Create an instrument panel
To create an instrument panel:
10.17.2 Add an instrument
To add a new instrument:
10.17.3 Resize an instrument
To resize an instrument:
10.17.4 Rename an instrument panel
To rename an instrument panel:
To delete an instrument panel:
10.17.6 Delete an instrument panel
11 Maintenance
11.1 Technical support, service and repairs
12 Restore
12.1 Restore settings and information
12.2 Restore processor software
To restore the system processor:
13 Upgrading the 8000i system
13.1 Install Software patch on to a stand alone processor Software patch: Stand alone processor
Software patch: multi-processor system Client.
13.3 Install a system image upgrade System image upgrade
Page
14 Specifications
