Description
The 8000i Sounder is an Ethernet based 1000 W/600 W
Place in 8000i System
You can connect the sounder to an 8000i processor either directly with a network crossover cable, (see "Network" page 50) or if there is more than one networked function in the 8000i system, through an 8000i 8 Port Network Linker.
Other parts required
A transducer will need to be purchased separately. For additional transducer options, contact your Authorized Northstar Dealer.
•NS002660R Airmar B260 1 kW Through Hull
•NS002657R Airmar B258 1 kW Through Hull
•NS002658R Airmar TM258 1 KW Transom Mount
•AA00210R Airmar P319 plastic trough hull 600 W
•Radarsonics 210B thru hull 600 W
•Radarsonics 250 transom mount 600 W
Network cable: A choice of network cables are sold separately in different lengths (see "Network" page 50)
Other Functions
Capable of interfacing to Northstar Fuel Transducers (Future)
Location Guide
This unit can be mounted closer to the transducer, for example, in the engine room or bilge area. It requires 10 V DC- 35 V DC to operate. Use a 5 Amp (see "Power" page 38). Network cable needs to be run to either a Northstar 8000i 8 Port Network Linker or a Northstar 8000i Processor (see "Network" page 50)
Mounting
Preferably mount vertically on to a panel. Create drip loops with all cables
For more information regarding installation please see the Northstar 8000i 1 kW Network Sounder Installation manual
Power Requirements
Voltage: 10 V DC - 35 V DC: current draw 7.2 W
6.8Northstar 8000i DVD-CD Player
Northstar 8000i
Description
The Northstar 8000i
Northstar 8000i System - 12" Display Processor Installation Manual | 23 |
