Location Guide
The 12" Display Processor is sunlight viewable with an anti reflective coating. For best results position out of direct sunlight. The ideal location should have minimal glare from windows or bright objects. The unit is waterproof to IPX5 specification.
Mounting
The unit can be flush mounted or mounted on a third party VESA bracket using the holes in the rear of the case.
Best viewing angles within a 120 degrees vertical range.
Power requirements |
|
Operation Voltage (once powered) | 10 V DC - 35 V DC |
|
|
Operation Voltage less than 1 min | 7 V DC - 9 V DC |
|
|
Power consumption Max @ 12 V | 50 W |
|
|
Fuse | 10 Amp @ 12 V DC (5 Amp @ 24 V DC) |
|
|
6.2Northstar 8000i Black Box Processor
Northstar 8000i Black Box Processor NS004730
Description
Northstar 8000i Black Box Processor:
Place in 8000i System
The Black Box Processor is used to run the 8000i software, which can be displayed either on a Northstar 15" Monitor, a 3rd party screen capable of displaying 1024 x 768 resolution or widescreen monitor that can support 1280 x 720. The processor provides interface to external devices both within the 8000i range of products and with external such as autopilot's and instruments. The unit can be stand alone or be connected the 8000i network as part of a multi processor system. If this is to be the master processor be sure to have easy access to one of the USB ports for future upgrades of the system. Use the provided USB panel mount cable if necessary
Northstar 8000i System - 12" Display Processor Installation Manual
16
