12 Restore
12.1Restore settings and information
You can restore the:
global settings that are stored on the master unit. This option deletes all the changes that you've made and resets all the display units in your 8000i System local settings. This option affects only the display unit that you're currently using routes, tracks, and waypoints information if the data has been corrupted.
12.2Restore processor software
This function will restore the operating system firstly back to factory defaults the it will apply any software patches that have been installed post factory.
To restore the system processor:
1.Start the Northstar 8000i System processor
2.Select Restore
3.Wait for the Northstar 8000i Installation environment to start. This can take up to five minutes.
4.To restore the system select Recover / Restore Current Version
5.To upgrade, select the source listed on the screen (this could be the DVD drive or other mass storage device that the upgrade file is located on).
6.The system will prompt you to confirm. Select Yes.
7.The upgrade files will be copied across to the 8000i processor. This will take approximately five to six minutes
8.Once this is done the system will reboot automatically and the files are installed into the system, this should take approximately four to five minutes.
9.A message appears: "System resealed OK to Reboot?" Select OK.
10.The system will restart and the Northstar 8000i screen will appear. This will take up to three minutes for the first time following a upgrade.
Northstar 8000i System - 12" Display Processor Installation Manual
82
