7 | Mounting the 8000i 12 inch Display Processor | 33 |
8 | Wiring Guidelines | 37 |
8.1 | Power | 38 |
8.2 | GPS Port | 40 |
8.3 | Utility Port | 41 |
8.3.1 | External Wake Up and Remote Power On | 41 |
8.3.2 | NMEA | 44 |
8.3.3 | NMEA Multiplexer (Noland NM42) | 44 |
8.3.4 | External Alarm | 46 |
8.4 | USB | 48 |
8.5 | Auxiliary port | 49 |
8.6 | RGB port | 50 |
8.7 | Network | 50 |
8.7.1 | Field Terminated Network Cable | 52 |
9 | Example System Layouts | 56 |
9.1 | 8000i Chart Plotter | 56 |
9.2 | 8000i Plotter Sounder | 57 |
9.3 | Entertainment | 59 |
9.4 | Full System | 61 |
10 | Northstar 8000i Initial Setup | 63 |
10.1 | Turn on the 12 inch Display Processor | 63 |
10.2 | Adjust the brightness on a 12 inch Display Processor | 63 |
10.3 | Set the network master unit | 64 |
10.4 | Install the chart data | 65 |
10.5 | Turn off the 12 inch Display Processor | 66 |
10.6 | Set the system preferences | 67 |
10.6.1 | Select the time format | 67 |
10.6.2 | Select your time zone | 67 |
10.6.3 | Turn the keypad beeps on or off | 67 |
10.6.4 | Change the transducer depth | 68 |
10.6.5 | Turn the keypad backlight on or off | 68 |
10.6.6 | Show/hide the top control bar | 69 |
10.7 | Specify your vessel statistics | 69 |
10.8 | Set the location of the media library | 69 |
10.9 | Set NMEA Output | 70 |
10.10 | Set NMEA Baud Rate | 71 |
10.11 | Calibrate the touch screen | 71 |
10.12 | Set the device (processor) name | 71 |
10.13 | Set the screen resolution | 72 |
10.14 | Set the units | 72 |
10.14.1 | Select the speed units | 72 |
10.14.2 | Select the depth units | 72 |
10.14.3 | Select the pressure units | 72 |
10.14.4 | Select the volume units for liquids | 73 |
| Northstar 8000i System - 12" Display Processor Installation Manual |
|
6
