Belkin 8000I 6.12 Northstar GPS Antenna (NS004743)

26

Northstar 8000i System -12" Display Processor Installation Manual

Place in 8000i System

Connects to any USB port of a processor, USB hub or 15" Monitor USB hub.

One (1) license key is required per system. The licence key is inserted into the master

processor on a multiprocessor system. This processor needs to be on in order for the rest of

the displays to see chart detail.

Optional Parts

Chart Licenses. To Purchase C-Map MaxPro charts. Please refer to operation manual how to

do this or contact an authorized Northstar dealer.

6.12 Northstar GPS Antenna (NS004743)

Read and observe the Warnings and Notices in the GPS Installation Manual

Northstar GPS Antenna NS004743

Description

12 Channel GPS Antenna

Functionality

Provides vessel's position, course over ground and speed over ground to the 8000i System.

The unit is powered from the 8000i processor

Place in 8000i System

Connects directly to the GPS port of a Northstar 8000i processor

Other parts required

Unit comes with a 33 ft (10 m) cable. Extensions may be required, contact your local

Northstar dealer

Location Guide

Read the location guide in the GPS Installation Manual

Mounting

Carefully follow the mounting instructions in the GPS Installation Manual

Contents

Main 1 Preface 1.1 Important Safety Information Page 1.2 Disclaimer 1.3 Warranty Contents 1 Preface 2 7 Mounting the 8000i 12 inch Display Processor 33 8 Wiring Guidelines 37 9 Example System Layouts 56 10 Northstar 8000i Initial Setup 63 11 Maintenance 81 12 Restore 82 13 Upgrading the 8000i system 83 14 Specifications 86 2 Introducing the Northstar 8000i System 3 Check the 12 inch Display Processor parts Page Page 4 Find your way around the 12 inch Display Processor Page 5 The Network Master Unit 6 8000i System Installation Installation Sequence Summary Guidelines 6.1 Northstar 8000i 12 inch Display Processor 6.2 Northstar 8000i Black Box Processor 6.3 Northstar 8000i 15 inch Monitor Page 6.4 Northstar 8000i Network Radar 6.5 Northstar 8000i 8 Port Network Linker 6.6 Northstar 8000i 4 Port USB Hub 6.7 Northstar 8000i 1 kW Network Sounder 6.8 Northstar 8000i DVD-CD Player 6.9 Northstar 8000i Remote Keypad 6.10 Northstar 8000i Video Interface 6.11 Northstar 8000i C-MAP Chart License Key 6.12 Northstar GPS Antenna (NS004743) 6.13 Other Components 6.13.1 Autopilot 6.13.2 Heading Sensor 6.13.3 Audio 6.13.4 NMEA-0183 Data Page 6.13.5 Mass Storage Devices 6.13.6 Human Interface Devices 6.13.7 Network Camera 7 Mounting the 8000i 12 inch Display Processor Page Page Page 8 Wiring Guidelines 8.1 Power Page 8.2 GPS Port 8.3 Utility Port 8.3.1 External Wake Up and Remote Power On Page Page 8.3.2 NMEA 8.3.3 NMEA Multiplexer (Noland NM42) Procedure Page Connect the following; 8.3.4 External Alarm Page 8.4 USB 8.5 Auxiliary port 8.6 RGB port 8.7 Network Page 8.7.1 Field Terminated Network Cable Page Terminating a Northstar 8000i RJ45 Field Kit Page 9 Example System Layouts 9.1 8000i Chart Plotter Page Page Page Page Page Page 10 Northstar 8000i Initial Setup 10.1 Turn on the 12 inch Display Processor 10.2 Adjust the brightness on a 12 inch Display Processor To adjust the backlight brightness 10.3 Set the network master unit To set the master 10.4 Install the chart data Install Charts interface To install chart collections To install all collections: To install a selected collection: 10.5 Turn off the 12 inch Display Processor 10.6 Set the system preferences 10.6.1 Select the time format To select the time format: 10.6.2 Select your time zone To select your time zone: To change the transducer depth: 10.6.5 Turn the keypad backlight on or off To turn the backlight on or off: 10.6.6 Show/hide the top control bar To show or hide the top control bar: 10.7 Specify your vessel statistics To specify your vessel statistics: 10.8 Set the location of the media library To set the location of the media library: 10.9 Set NMEA Output To select NMEA Output sentences: 10.10 Set NMEA Baud Rate To select NMEA Output sentences: 10.11 Calibrate the touch screen To calibrate the touch screen: 10.12 Set the device (processor) name 10.13 Set the screen resolution To set the screen resolution: 10.14 Set the units 10.14.1 Select the speed units To select the speed units: To select the volume units for liquids: 10.14.5 Select the large scale distance units To select the large scale distance units: 10.14.6 Select the small scale distance units To select the small scale distance units: To select the temperature units: 10.15 Radar 10.15.1 Set up the radar before using it for the first time To set up the radar before using it: 10.15.2 Change the radar startup mode To change the radar startup mode: 10.15.3 Change the radar range offset (trigger delay) To change the radar range offset: 10.15.4 Change the radar bearing alignment To change the radar bearing alignment: 10.15.5 Change the parking angle To change the parking angle: 10.16 Sounder 10.16.1 Change the water temperature offset To change the offset for the water temperature: 10.16.2 Change the water temperature averaging time To change the water temperature averaging time: 10.17 Instruments 10.17.1 Create an instrument panel To create an instrument panel: 10.17.2 Add an instrument To add a new instrument: 10.17.3 Resize an instrument To resize an instrument: 10.17.4 Rename an instrument panel To rename an instrument panel: To delete an instrument panel: 10.17.6 Delete an instrument panel 11 Maintenance 11.1 Technical support, service and repairs 12 Restore 12.1 Restore settings and information 12.2 Restore processor software To restore the system processor: 13 Upgrading the 8000i system 13.1 Install Software patch on to a stand alone processor Software patch: Stand alone processor Software patch: multi-processor system Client. 13.3 Install a system image upgrade System image upgrade Page 14 Specifications