24
Northstar 8000i System -12" Display Processor Installation Manual
Functionality
• Plays Music CDs, Music DVDs, MP3,
• Plays DVD Movies, Video CDs
• Loads Music on to 8000i system media location.
• Loads new system software.
Place in 8000i System
The DVD-CD player is not a network device. The media in the drive is only accessible by the
processor it is connected to.
The unit connects to the 8000i system via the supplied USB cable. It requires ships' DC power
and the 8000i processor to be on to operate.
Optional Parts
If both 8000i processor USB ports are used, a NS004720 4 Port USB Hub may be used (see
"Northstar 8000i 4 Port USB Hub" page 21)
Location Guide
Location should have easy access to the slot loading mechanism.
Locate no more than a 16.5 ft (5 m) Cable run away from the processor, USB Hub, or 15"
Monitor it is attached to.
Access to power: The DVD requires 10 V DC - 35 V DC. Current Draw 7 W Use a 5 Amp breaker
Mounting
The DVD/CD Player can be flush mounted into a panel or be free standing. For installation
information, see the Northstar 8000i DVD-CD Player Installation Manual.
Power Requirements
Voltage: 10 V DC - 35 V DC: current draw 7 W
Northstar 8000i Remote Keypad NS004747
Description
The Northstar 8000i Remote Keypad is a control interface for the 8000i System. It duplicates
the controls of the 12" Display Processor and is mainly used to control the Northstar 8000i
Black Box Processor, however it can be used as a second control for a 12" Display Processor
Place in 8000i System
It connects to the 8000i processor via USB. It can be connected to any 8000i processor, a
Northstar 8000i 15" Monitor or to a Northstar 8000i USB Hub. The unit is self powered
through the USB Cable
Optional Parts
If both processor, and or 15" Monitor USB ports are full use NS004720 4 Port USB Hub