2.Select Setup from the control panel.
3.Select + Units to display a list of unit specification options.
4.The Pressure Units button shows the current setting. Select the button if you want to change the setting and a drop down list of choices appears.
5.Select the new setting. The new setting is applied immediately and stays until you change it again.
6.When you are finished, select – Units.
10.14.4Select the volume units for liquids
You can select from US Gallons, Liters, or Imperial Gallons for volume units for measuring liquids. US Gallons is the default.
To select the volume units for liquids:
1.Select Display.
2.Select Setup from the control panel.
3.Select + Units to display a list of unit specification options.
4.The Liquid Volume Units button shows the current setting. Select the button if you want to change the setting and a drop down list of choices appears.
5.Select the new setting. The new setting is applied immediately and stays until you change it again.
6.When you are finished, select – Units.
10.14.5Select the large scale distance units
You can select from Nautical Miles, Statute Miles, or Kilometers for large scale distances. Nautical Miles is the default.
To select the large scale distance units:
1.Select Display.
2.Select Setup from the control panel.
3.Select + Units to display a list of unit specification options.
4.The Distance Units button shows the current setting. Select the button if you want to change the setting and a drop down list of choices appears.
5.Select the new setting. The new setting is applied immediately and stays until you change it again.
6.When you are finished, select – Units.
10.14.6Select the small scale distance units
You can select from Yards, Feet, or Meters for small scale distances. Yards is the default.
To select the small scale distance units:
1.Select Display.
2.Select Setup from the control panel.
3.Select + Units to display a list of unit specification options.
4.The Distance Units Small button shows the current setting. Select the button if you want to change the setting and a drop down list of choices appears.
5.Select the new setting. The new setting is applied immediately and stays until you change it again.
6.When you are finished, select – Units.
Northstar 8000i System - 12" Display Processor Installation Manual | 73 |
