50
Northstar 8000i System -12" Display Processor Installation Manual
8.6 RGB port
The RGB port is used to connect the Northstar 8000i processor to an external monitor. This
can be either the Northstar 8000i 15" Monitor or any third party monitor capable of
displaying a minimum of 800 x 600 resolution.
To connect an 8000i processor to a 8000i 15" Monitor. Use optional NS004806 Cable
From To Resolution
12" Display RGB Port Northstar 15" Monitor
RGB 1 or 2
800 x 600
Black Box Processor Northstar 15" Monitor
RGB 1 or 2
1024 x 768
To connect an 8000i processor to a third party monitor
From To Resolution
12" Display RGB Port Third party Monitor 800 x 600
Black Box Processor Third Party Monitor 1024 x 768
NS8000i RGB Pinout
Pin Function
1 Red
2 + 9 V out GPS Power
3 Comms Out - (DGPS)
4 Comms Out +
5 Cmds to DGPS
6 Comms In
7 Differential Data to GPS, Cmds to DGPS
8 -
8.7 Network
If the Northstar 8000i processor is a stand alone unit, i.e. not connected to any other network
device. Be sure to use the supplied Network Loop Back Plug. Connect this to the Network
Port