48
Northstar 8000i System -12" Display Processor Installation Manual
8.4 USB An 8000i processor has two type A connectors, which are designed for Northstar 8000i USB
cables. Each USB port’s 5 V DC power output can provide up to 500 mA.
Connect a USB accessory, such as an 8000i System Remote Keypad, or a Northstar 8000i
4 Port Hub.
NOTE: It is recommended you use the install the supplied USB dash mount cable to a
location that will provide easy access to attach USB devices. This especially applies to the
Master 8000i processor. This make system upgrades much easier
USB can be run to maximum distance of 16.5 ft (5 m).
Use NS004809 USB Dash mount cable to bring make any single USB port more accessible:
Do not use this cable as an USB extension cable. i.e. Do not join two (2) cables together. Use
the 16.5 ft (5 m) cable instead
Connect to either
USB Port on 8000i
Processor
A NS004809 USB Dash mount cable
Use NS004808 to connect to the following. This cable is included with the following. This
cable is also available in a 16.5 ft (5 m) length.