ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL

ACCM - 0xfffffff

ACFC - off

authentication - none

Magic number - off - not negotiated

MRU - 1500 octets

PFC - two-octet fields

timeout - 3 seconds

pppiface lcp timeout [seconds]

Timeout—Sets the timeout interval.

seconds—Displays or sets the interval to wait between LCP configuration or termination attempts. The default is 3 seconds.

2.18.4IPCP NEGOTIATION SUBCOMMANDS

pppi&g_iface ipcp {local remote} address [on off allow [on off]]

local address.enables or disables negotiation of the local address. By default, no addresses are negotiated. Allows a Router to either request that the remote end set the IP address by putting 0.0.0.0 as the local address or to suggest the remote end allow the Router to set its IP address by configuring a non-zero remote address.

NOTE

You can specify the local address using the ifconfig command. The default local IP address is the address set with the “ip address” command.

ppp i&g_iface ipcp {local remote} compress

[tcp slots [flag] none allow [on off]]

TCP compression—Displays or sets the local or remote TCP compression options. The default is that compression is on and that the number of slots is 16 and the flags default to 0. In addition, non- compression can be specified for the local or suggested for the remote side.

slots default is 16. flag default is 0.

2.18.5IPXCP NEGOTIATION

ppp i&g_iface ipxcp {local remote} compress

[cipx [slots [flag]] none allow [on off]]

IPX compression—Displays or sets the local or remote IPX compression options. By default compression is on, the number of slots is 16 and the flags default to 0. In addition, non-compression can be specified for the local or suggested for the remote side.

slots default is 16.

flag default is 0.

179

Page 179
Image 179
Black Box LRA001A-R2, LRS002A-R2, LRA005A-R2 manual 179, Ppp iface lcp timeout seconds