ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL

RIP

SNMP

SYSTEM

TCP

TIP

TRACE

TRACEROUTE

A.1 Syslog Messages

This section contains a listing of error messages that the Router collects for the UNIX system logging system (syslog).

syslog can be configured to send messages to a specified remote IP host (where they are displayed or logged remotely, according to how the remote syslog daemon is configured), or to the Router’s serial port console (after the syslog on command has been entered at the console).

The system messages are listed in alphabetical order within defined categories (groups), as they are displayed on the screen. The groups identify the source module from which the error message originated. The priority entries (assigned by syslog) indicate which log in syslog that the message is stored in. Also refer to the syslog command.

A.1.1 CHAP GROUP

iface CHAP failed to verify user_name

The system at the other end of the PPP link presented an invalid username; the Router will disconnect the line. Reconfigure CHAP with the correct user and password information. Priority: LOG_ERR

iface CHAP Unexpected remote challenge

The remote system has requested CHAP password validation, but this end does not have a userid or password configured. Use the config modify command to add the CHAP user name. Reboot the local Router to effect the configuration. When this error occurs, link validation is declared failed and the link is disconnected. Priority LOG_ERR.

iface CHAP peer says: salutation_string

The information string returned by a peer CHAP authenticator. This string could say Welcome on a successful connection, or Invalid response on an unsuccessful connection attempt. This message can help you determine if the link was established successfully. Priority: LOG_INFO.

A.1.2 DIALER GROUP

Account disabled at this time

The client (who is logged in) is being disconnected because their access shift has just expired. Priority:

LOG_WARNING.

iface call failed: reason

The Router has attempted to place a call and failed to connect. Any of the following reasons for failure may be displayed: NO CARRIER, BUSY, NO DIALTONE, NO ANSWER. Priority: LOG_ERR.

238

Page 238
Image 238
Black Box LRA005A-R2 Syslog Messages, 238, Chap Group, Iface Chap peer says salutationstring, Iface call failed reason