Black Box LRS002A-R2 manual 210, Sapfilter delete name, Sapfilter enable disable, Sapfilter flush

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL

allow—Allows any packet that matches the filter specification to pass through the router.

deny—Drops packets that matches the filter specification.

nodial—Only drops packets that would make the destination interface dial. Otherwise, the packet is passed on. Use filters to keep hosts outside of your organization from initiating calls on your phone line and increasing your phone bills.

[-o {before after} existing_name]

Change the order of filters in the filter list. If before or after is not specified, then the filter is inserted at the end of the list.

before—insert the filter before existing_name.

after—insert the filter after existing_name.

existing_name—Enter a filter name already in the list.

[-h{hopcount}]—Specify a hops limit

Places a limit on the number of IPX router hops visible to the Router. This can be used on large networks as a security feature to limit access from branch offices to a small area on the your local network. Use ripfilter -h, if possible.

sapfilter delete name

Deletes the specified filter.

name—A 1- to 6-character ASCII identifier to reference a SAP filter entry you wish to delete.

sapfilter {enable disable}

Enables or disables SAP packet filtering. SAP packet filtering is disabled on startup and must be explicitly enabled.

enable—Enable SAP packet filtering.

disable—Disable SAP packet filtering. This is the default condition.

sapfilter flush

Deletes all SAP packet filters.

sapfilter move name [{before after} existing_name]

Enables you to change the order of packet filters in the SAP filter list. If you do not specify before or after, then the entry is placed last in the list.

name—The name of the filter you want to move.

before—Optional. Move name to the position in the list before existing_name. If you do not specify, name is moved to the end of the list.

after—Optional. Move name to the position in the list after existing_name. If you do not specify, name is moved to the end of the list.

existing_name—Optional. The name of the filter in the filter list before or after which you want to position name, the filter you want to move. If you do not specify, name is moved to the end of the list.

210