Black Box LRA005A-R2, LRS002A-R2, LRA001A-R2 manual 241, Iface V.25bis call failed reasonreturned

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL

means that the period of network inactivity has exceeded the idle timer setting in the dialup command. Priority: LOG_INFO.

iface link stalled, hanging up

A modem link in keepup mode is idle and an attempted connection did not get a response. Try again later. If problem persists, recycle the power. Priority: LOG_INFO.

iface misconfigured speed, actual_speed speed_tried

An attempt was made to set the serial port to an illegal speed. Correct the error in the dialup command line and reissue the dialup command to the modem. Priority: LOG_ERR.

iface not initialized, dialer exiting

The modem was not initialized. If using a dialer script, verify that the initialization string is correct and the command line is in the correct order. Otherwise, cycle the Router power off then on again to try another modem initialization. If the modem still does not initialize, contact Technical Support. Priority: LOG_ERR.

iface not ready

The Router has not received the DTR signal and the modem is not functional for unknown reasons. Cycle the power off and on again. If the problem persists, call Technical Support for assistance. Priority

LOG_WARNING.

iface outdial not allowed

An attempt has been made to dial out from the Router while the interface has been configured for incoming calls only. Priority: LOG_ERR.

iface redial failed m_response This should say OK

An attempt to redial and establish a modem connection failed with an unexpected modem response message. The response that is displayed should have been the normal modem OK response. This error will stop the Router from completing its current function, whether it is dialing from a script, or just re- initializing the modem. Look for a dialer script error, then cycle the Router power from off to on to restart the Router. Priority: LOG_ERR.

iface time connected: time Pkts sent: num Bytes sent: num Pkts recvd: num Bytes rcvd: num

Normal usage statistics that are displayed at the end of every session. Priority: LOG_INFO.

iface tip or dialer already active

The interface is currently being used by tip or another dialer. Wait until the interface is not busy or correct the busy condition. Priority: LOG_ERR.

iface total connections: xxx in: xxx out: xxx

At midnight each day the Router prints a connection report containing status information for total connections, connections in, and connections out. Priority: LOG_INFO.

iface V.25bis call failed - reason_returned

A dialup connection using the V.25 bis protocol failed. The reason for failure is displayed with this

241