Black Box LRA005A-R2, LRS002A-R2 11 rip, 226, Rip netmask list, Rip add hostaddr seconds flags

ASYNC ROUTER AR-P, AR-5, AND SYNC ROUTER REFERENCE MANUAL

ping dest_addr [packet_size]

dest_addr—Enter the IP address of the device where packets will be sent. Use standard dotted-quad notation or the host name if DNS service is available.

packet_size—Modify the default packet size ping sends, which is 4 octets.

ping -sdest_addr [packet_size] [count]

dest_addr—Enter the IP address of the device where packets will be sent. Use standard dotted-quad notation or the host name if DNS service is available.

packet_size—Modify the default packet size ping sends, which is 4 octets

count—Enter a count of the number of packets generated. With -sset, ping sends one packet per second by default, and prints one line of output with round trip time for every ECHO_RESPONSE received.

4.11 rip

Configure/display Routing Information Protocol information

Syntax

rip accept router_addr

rip add host_addr seconds [flags] rip delete host_addr

rip duplicate [{on off}] rip merge [{on off]]

rip netmask add net_addr /net_bits /subnet_bits rip netmask delete net_addr/net_bits

rip netmask list

rip refuse router_addr rip request router_addr rip status

Description

The rip command is used to display information about or configure the Routing Information Protocol (RIP). The RIP protocol is used to automatically transfer routing table information between routers. The table information is sent at specified intervals and also sent whenever a previously reachable destination becomes unreachable.

Subcommands and parameters

rip accept router_addr

Remove the router with address router_addr from the RIP filter table, allowing future RIP packets to be accepted from that router. This is the opposite of the rip refuse subcommand.

router_addr—Enter the address of the router to be removed from the RIP filter table, allowing future packets to be accepted from it.

rip add host_addr seconds [flags]

Adds an entry to the RIP table. The host with address host_addr is sent the entire IP routing table every seconds seconds.

226