49
CARE & CLEANING
Ensure the bread maker is turned OFF by pressing and holding
the CANCEL button. The bread maker is OFF when the START |
PAUSE button surround is no longer red. Remove the power plug
from the power outlet. Allow the bread maker and all accessories
to cool completely before disassembling and cleaning.
Cleaning the Stainless Steel Housing
1. Wipe the exterior of the stainless steel housing and the
LCD screen with a soft, damp cloth. A non-abrasive liquid
cleanser or mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to the sponge, not the
outer surface or LCD screen, before cleaning. Do not use a
dry paper towel or cloth to clean the LCD screen, or use an
abrasive cleanser or metal scouring pad to clean any part of
the bread maker as these will scratch the surface.
NOTE
Never immerse the stainless steel housing in water or
place in the dishwasher. Take care not to allow water or
cleaning fluids to seep under the buttons or LCD screen
on the control panel.
2. If over-spills such as flour, nuts, raisins etc. occur in the interior
baking chamber, carefully remove them using a soft, damp
cloth. Use extreme caution when cleaning the heating elements.
Ensure the bread maker is completely cool then gently rub
a soft, damp sponge or cloth along the length of the heating
element. Do not use any type of cleanser or cleaning agent.
3. Let all surfaces dry thoroughly prior to inserting the power
plug into a power outlet.
Cleaning the Lid
1. For thorough cleaning, the lid can be removed from the
stainless steel housing. Lift open the lid completely. Holding
the sides of the lid, lift straight upwards. The lid should
detach from the hinge. To replace the lid, align the pivot
pins on the lid with the pivot points on the hinge.
Wipe the lid, viewing window and Automatic Fruit and Nut
Dispenser with a soft, damp sponge. A glass cleaner or mild
detergent may be used. Do not use an abrasive cleanser or metal
scouring pad as these will scratch the surface.
NOTE
Never immerse the lid in water or place in the dishwasher.
2. Let all surfaces dry thoroughly prior to inserting the power
plug into a power outlet.
BBM800XL_IB_FA.indd 49 1/07/10 10:47 AM