Breville BSB530XL manual Breville recommends safety first, are sharp

Breville recommends safety first

•Always assemble processing bowl lid and insure it is locked into place before use.

•If food becomes lodged around the processing blades or in the blade guard, release the trigger switch and unplug the cord. Use a spatula to dislodge the food. Do not use fingers as the blades

are sharp.

•Do not remove the immersion blender from ingredients during operation. Ensure the appliance is off and has stopped before removing, to avoid contact with moving blades or whisk.

•While processing food to reduce the risk of severe injury to persons or damage to the appliance a spatula may be used, but must be used only when the food processor is not running.

•Do not leave the immersion blender unattended when in use.

•To protect against electric shock do not immerse the motor body, cord or power plug in water or any other liquid.

•Keep the appliance clean. Follow the cleaning instructions provided in this book.

•Do not use the immersion blender with wet hands.

•Do not push food into the feed chute with your fingers or other utensils. Always use the food pusher provided.

•Keep fingers, hands, knives and other utensils away from moving blade and discs.

•Do not place hands or fingers in the processing bowl of the food processor unless the motor, processing blades or disc have come to a complete stop. Ensure the trigger switch has been released to turn the motor off and the power cord is unplugged from the power outlet before removing the lid from the processing bowl.

•The BSB530XL includes several attachments. The rating for this appliance is based on the immersion blending leg and food processor attachments which draw the greatest load. Other included attachments may draw significantly less load during their use.

•The appliance is also fitted with a polarised plug (one blade is wider than the other). To reduce the risk of electric shock this plug will fit in a polarised outlet only one way. If the plug does not fit, contact a qualified electrician. Do not modify the plug in any way.

5