Breville BSB530XL To detach the blending leg, Recommendations when using as aN immersion blender

PAgeASSEMBLYheader& OPERATION.....

4.Place the blending leg as deeply as possible into the jug and press the trigger switch to turn the immersion blender on. The button must be held for the required duration of operation.

5.Work through the ingredients in the jug with a gentle raising and lowering motion.

6.Turn the motor off by releasing the trigger switch.

7.Ensure the motor has completely stopped before lifting the blender out of the jug.

8.When processing has finished remove the power plug.

To detach the blending leg

Ensure the trigger switch is released and the appliance is unplugged. Hold the motor body with one hand, and using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the blending leg to detach.

Recommendations when using as aN immersion blender

•The immersion blender blends foods and liquids rapidly, therefore it is easy to over process. Remember when using the blending leg to stop the immersion blender and check food throughout the operation.

•Allow food to cool before blending.

•The stainless steel blending leg allows for hot food to be processed directly in the saucepan. This makes blending soups and sauces very easy.

•For safety reasons remove saucepan away from the heat before processing.

•Ensure the body of the appliance and power cord are kept away from any heat source.

•When pureeing and blending, cut food into uniform sizes. This will ensure smooth and consistent results.

•Warm all liquids to be added to soups and purees, this will ensure even blending.

•Do not operate the appliance continuously for more than 1 minute. Allow the motor to rest for 1 minute between each use.

If food becomes lodged around the processing blade or in the blade guard, follow the following safety instructions:

1.Release the trigger switch to power off and unplug the cord.

2.Use a spatula to carefully dislodge the food. Do not use fingers as the blades are sharp.

3.After the food has been removed and blades are clear, plug the appliance back into the power supply and continue blending.

11