Brother BAS-311F-L, BAS-326F-0, BAS-311F-0 instruction manual Installation

								3. INSTALLATION
3. INSTALLATION
							CAUTION
Machine installation should only be carried out by								All cords should be secured at least 25 mm away
a qualified technician.								from any moving parts. Furthermore, do not
Contact	your		Brother	dealer	or	a qualified		excessively bend the cable or secure it too firmly
								staples, otherwise there is the danger that fire or
electrician for any electrical work that may need to
								electric shocks could occur.
be done.
								Install the belt cover and the frame side cover to
The sewing machine head weighs more than 65 kg
								the machine head and motor.
(311F-0), 70 kg (311F-L, 326F-0). The installation
should be carried out by two or more people.								If using a work table which has casters, the casters
Do not connect the power cord until installation is								should be secured in such a way so that they
								cannot move.
complete, otherwise the machine may operate if
the foot switch is depressed by mistake, which								Be sure to wear protective goggles and gloves
could result in injury.								when handling the lubricating oil and grease, so
Be sure	to	connect the		ground. If		the	ground	that they do not get into your eyes or onto your
								skin, otherwise inflammation can result.
connection		is	not secure, you		run	the	risk of
								Furthermore, do not drink the oil or eat the grease
receiving a serious electric shock.
								under any circumstances, as they can cause
Hold the machine head with both hands by two or
								vomiting and diarrhoea.
more peple when tilting it back or returning it to its								keep the oil out of the reach of children.
original position. Furthermore, after tilting back the
machine head, do not push the face plate side or
the pulley side from above, as this could cause the
machine head to topple over, which may result in
personal injury or damage to the machine.

BAS-311F-0, 311F-L, 326F-0

3