3. INSTALLATION

3-8. Installing the machine head

1163S

(2)

(8)

(5)

(9)

(1)

(4)

(3)

(5)

(6)

14.5m

133m

13.2m

Fig. 1

1164S

1165S

1.Insert the head hinges (1) into the machine head so that they are parallel, and then secure them with the two set screws (2).

2.Place the machine head gently on top of the rubber cushions (3) and cushions (4).

Note

Poll the cords (5) out as shown in the illustration above in order to prevent them from being clamped by the machine head.

3.Install the hinge presser (6) with the two bolts.

4.Check that the head position switch is turned on as shown in Figure 1.

5.Connect the motor cord connector (8) to the accessory cord connector (9).

8

BAS-311F-0, 311F-L, 326F-0

Page 15
Image 15
Brother BAS-326F-0, BAS-311F-L, BAS-311F-0 instruction manual Installing the machine head