3. INSTALLATION
3-6. Installing the cushions
(2)
(1)
0056Q
Place the two cushions (1) into the holes in the work table, and secure them in place with the nails (2).
*Install so that the head of the nail does not protrude from the rubber surface.
3-7. Installing the switching plate
(2)
(1)
15
9
11
Install the switching plate (1) to the work table with the two wood screws (2) in the position shown in the illustration.
*The switching plate and the switch bracket which is attached to the machine head prevent the sewing machine from starting when the machine head is tilted back. Therefore, this means that the sewing machine will not start if the switching plate is not installed.
1162S
7
