Brother BAS-311F-L, BAS-326F-0, BAS-311F-0 instruction manual Tilting the sewing machine head

3. INSTALLATION

3-9. Tilting the sewing machine head

BAS-311F-L, 326F-0 : Remove the X feed base cover (1) and the feed base cover support (3) (below) from the machine head before tapping the head rest (5) (next page) into the work table.

BAS-311F-LBAS-326F-0

(2) (2)

(1)	(1)
1166S	1167S

1. Loosen the screws (2) which are holding the X feed base cover L assembly (1) by about 2-3 turns, and then remove the X feed base cover L assembly (1) in the direction of the arrow in the illustration.

Note

The sewing machine is packed without the X feed base cover L assembly (1) installed.

BAS-311F-L BAS-326F-0

(3) (4) (3) (4)

1168S 1169S

2.Loosen the screws (4) which are holding the feed base cover support (3) on the left of the sewing machine (when looking from the front of the sewing machine) by about 2-3 turns, lift the feed base cover support (3) up slightly (BAS-

311F-L) or down slightly (BAS-326F-0), and then remove it in the direction of the arrow in the illustration.

Note

The sewing machine is packed without the feed base cover support (3) installed.

BAS-311F-0, 311F-L, 326F-0

9