6. USING THE OPERATION PANEL
(5)
(13)
(14)
(110)
| (6) | (12) | (16) | (15) | (17) |
|
|
|
|
| 1208S |
|
| ||||
(10) Bobbin Thread COUNTER | Illuminates when bobbin thread counter mode has been selected using the menu | ||||
indicator | switch (6). |
|
|
|
|
(11) SPLIT NO. indicator | Illuminates when split No. mode has been selected using the menu switch (6). | ||||
(12) Dial | The setting shown on the display screen (5) can be changed by turning this dial | ||||
| while pressing the STEP BACK switch (17). |
| |||
(13) Bobbin Thread SET switch | Used to store the number of work pieces displayed in the bobbin thread counter | ||||
| to floppy disk. |
|
|
|
|
(14) Bobbin Thread CHANGE | Used to continue sewing after replacing the bobbin thread. | ||||
switch | (An alarm will sound when the counter reads <000>. Sewing is not possible when | ||||
| the counter reads <000>.) (Refer to | ||||
(15) TEST switch | Used to move the feed mechanism only in order to confirm a programmed stitch | ||||
| pattern. |
|
|
|
|
(16) TEST indicator | Lights when the TEST switch is pressed. |
| |||
(17) STEP BACK switch | Used when winding a fresh bobbin, or when correcting a stitch pattern due to a | ||||
(RESET switch) | broken needle thread. |
|
|
| |
| Also used to reset error displays. |
|
| ||
27
