PhotoCapture Center™ Difficulties

Difficulty

Suggestions

Removable Disk does not work

1

If you are using Windows® 2000, have you installed the Windows® 2000

properly.

 

update? If not, do the following:

 

 

1) Unplug the USB cable.

 

 

2) Install the Windows® 2000 update using one of the following methods.

 

 

Install MFL-Pro Suite from the Installation CD-ROM. (See the Quick

 

 

Setup Guide.)

 

 

Download the latest service pack from the Microsoft Web site.

 

 

3) Wait about 1 minute after you restart the PC, and then connect the USB

 

 

cable.

 

2

Take out the memory card or USB Flash memory drive and put it back in

 

 

again.

 

3

If you have tried “Eject” from within Windows®, take out the memory card or

 

 

USB Flash memory drive before you continue.

 

4

If an error message appears when you try to eject the memory card or USB

 

 

Flash memory drive, it means the card is being accessed. Wait a while and

 

 

then try again.

 

5

If all of the above do not work, turn off your PC and machine, and then turn

 

 

them on again. (You will have to unplug the power cord of the machine to turn

 

 

it off.)

 

 

Cannot access Removable Disk

Make sure that you have correctly inserted the memory card or USB Flash

from Desktop icon.

memory drive.

 

 

Part of my photo is missing when

Make sure that Borderless printing and Cropping are turned off. (See Borderless

printed.

printing and Cropping in chapter 8 of the Advanced User’s Guide.)

 

 

 

Network Difficulties

Difficulty

Suggestions

Cannot print over the network.

Make sure that your machine is powered on and is online and in Ready mode.

 

Print a Network Configuration list (see Reports in chapter 6 of the Advanced

 

User’s Guide.) and check the current Network settings printed in this list.

 

Reconnect the LAN cable to the hub to verify that the cabling and network

 

connections are good. If possible, try connecting the machine to a different port on

 

your hub using a different cable. If the connections are good, the machine shows

 

LAN Active for 2 seconds.

 

(If you are using a wireless connection or are having Network problems, see the

 

Network User’s Guide for more information.)

 

 

96