Chapter 2

Note

When you put Photo L size into the paper tray, you need to release the hinges on both sides of the output paper tray cover, and push the cover over. And then slide the paper length guide.

g Close the output paper tray cover. Check that the paper is flat in the tray and below the maximum paper mark (1).

Overfilling the paper tray may cause paper jams.

1

f Gently adjust the paper side guides to fit the paper with both hands.

Make sure the paper side guides touch the sides of the paper.

Note

Be careful not to push the paper in too far; it may lift at the back of the tray and cause feed problems.

h Slowly push the paper tray completely into the machine.

WARNING

DO NOT push Tray #1 into the machine too quickly. Doing this may cause injury to your hand by trapping it between Tray #1 and Tray #2. Please push Tray #1 in slowly.

12