Chapter 2

d Using both hands gently adjust the manual feed slot paper guides to fit the paper.

Note

DO NOT press the paper guides too tightly against the paper. Doing this may cause the paper to fold.

Place the paper in the center of the manual feed slot between the paper guides. If the paper is not centered, pull it out and insert it again at the center position.

e Using both hands, put one sheet of paper in the manual feed slot until the front edge touches the paper feed roller and the machine beeps. Let go of the paper when you feel the machine feed the paper in a short distance. The LCD will show

Manual Feed Slot ready.

Note

When loading an envelope, or a sheet of thick paper, push the envelope into the manual feed slot until you feel it grab the envelope.

f If the data does not fit on one page, the LCD will prompt you to load another page. Place another sheet of paper in the manual feed slot, and then press Black Start or Color Start.

Note

Make sure printing has finished before you close the manual feed slot.

When paper is placed in the manual feed slot, the machine always prints from the manual feed slot.

Paper inserted in the manual feed slot while a test page, fax or report is being printed will be ejected.

During the machine's cleaning process, paper you place in the manual feed slot will be ejected. Wait until the machine finishes its cleaning, and then put the paper into the manual feed slot again.

18