d Close the document cover and open the ADF cover.
Clean the white bar (1) and the glass strip (2) with a soft
1
2
e Close the ADF cover.
f
Note
In addition to cleaning the scanner glass and glass strip with a
i
When there is a | After the glass |
spot of dirt or | strip is cleaned |
correction fluid | the vertical line is |
on the glass strip | gone. |
the printed |
|
sample shows a |
|
vertical line. |
|
|
|
Cleaning the print head
To maintain good print quality, the machine will automatically clean the print head when needed. You can start the cleaning process manually if there is a print quality problem.
Clean the print head and ink cartridges if you get a horizontal line in the text or graphics, or blank text on your printed pages. You can clean Black only, three colors at a time (Yellow/Cyan/Magenta), or all four colors at once.
Cleaning the print head consumes ink. Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
a Press .
b Press Cleaning.
c Press Black, Color or All.
The machine cleans the print head. When cleaning is finished, the machine will go back to the Ready screen automatically.
Note
If you clean the print head at least five times and the print has not improved, try installing a new Genuine Brother Brand replacement ink cartridge for each problem color. Try cleaning the print head again up to five more times. If the print has not improved call Brother Customer Service. (See Brother numbers
on page i.)
68