Handling and using print media

Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.

Avoid touching the shiny (coated) side of photo paper. Load photo paper with the shiny side facing down.

Avoid touching either side of transparencies because they absorb water and perspiration easily, and this may cause decreased output quality. Transparencies designed for laser printers/copiers may stain your next document. Use only transparencies recommended for inkjet printing.

IMPORTANT

DO NOT use the following kinds of paper:

•Damaged, curled, wrinkled, or irregularly shaped

Loading paper

Labels

Labels should be arranged so that they cover the entire length and width of the sheet. Using labels with spaces may result in labels

peeling off and causing serious jams or print 2 problems.

Types of labels to avoid

Do not use labels that are damaged, curled, wrinkled or an unusual shape.

IMPORTANT

•Avoid feeding labels with the carrier sheet exposed because your machine will be damaged.

•DO NOT reuse or insert labels that have previously been used or are missing few labels on the sheet.

1

1

10.08 in. (2 mm) or greater curl may cause jams to occur.

•Extremely shiny or highly textured

•Paper that cannot be arranged uniformly when stacked

•Paper made with a short grain

Paper capacity of the output paper tray cover

Up to 50 sheets of Letter, Legal or A4 20 lb (80 g/m2) paper.

Transparencies and photo paper must be picked up from the output paper tray cover one page at a time to avoid smudging.

25