Brother J6910DW manual 90

Error Message	Cause	Action
Out of Fax Memory	The fax memory is full.	Do one of the following:
		 Clear the data in the memory. To
		gain extra memory, you can turn
		off Memory Receive. (See Turning
		off Memory Receive operations in
		chapter 4 of the Advanced User’s
		Guide.)
		 Print the faxes that are in the
		memory. (See Printing a fax from
		the memory in chapter 4 of the
		Advanced User’s Guide.)
Out of Memory	The machine's memory is full.	If a copy operation is in process:
		Press Stop/Exit and wait until the
		other operations finish, and then try
		again.
	The memory card or USB Flash	Delete unused files from your memory
	memory drive you are using does not	card or USB Flash memory drive to
	have enough free space to scan the	make some free space and then try
	document.	again.
Paper Jam [Front]	Paper is jammed in the machine.	Remove the jammed paper by
		following the steps in Paper is jammed
		at the front of the machine on page 81.
		Make sure the paper length guide is
		set to the correct paper size. DO NOT
		extend the paper tray when you load
		A5 or smaller size paper.
Paper Jam [Front,Rear]	Paper is jammed in the machine.	Remove the jammed paper by
		following the steps in Paper is jammed
		at the front and back of the machine
		on page 83.
		Make sure the paper length guide is
		set to the correct paper size. DO NOT
		extend the paper tray when you load
		A5 or smaller size paper.
	More than one sheet of paper was	Do not put more than one sheet of
	placed in the manual feed slot.	paper in the manual feed slot at any
	—OR—	one time. Wait until the LCD shows
		Put paper in Manual Feed Slot
	Another sheet of paper was placed in	Then Press Start before you feed
	the manual feed slot before the LCD	the next sheet of paper in the manual
	showed	feed slot.
	Put paper in Manual Feed Slot	Remove the jammed paper by
	Then Press Start.	following the steps in Paper is jammed
		at the front and back of the machine
		on page 83.

76