PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive

PhotoCaptureCenter™ print settings

You can change the print settings for the next printing.

These settings are temporary, and the machine returns to its default settings

3 minutes after printing, unless you have set the Mode Timer to 2 minutes or less. (See Mode Timer in chapter 1 of the Advanced User’s Guide.)

Note

You can save the print settings you use most often by setting them as the default. (See Setting your changes as the new default in chapter 8 of the Advanced User’s Guide.)

How to scan to a memory card or USB Flash memory drive

You can scan black & white and color documents into a memory card or USB Flash memory drive. Black & white documents will be stored in PDF (*.PDF) or TIFF (*.TIF) file formats. Color documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is Color 200 dpi and the default file format is PDF. The machine automatically creates file names based on the current date. (For details, see the Quick Setup Guide.) For example, the fifth image scanned on July 1, 2011 would be named 07011105.PDF. You can change the color and quality.

Quality

 

 

Selectable File

 

 

 

 

Format

 

Color 100 dpi

JPEG / PDF

 

Color 200

dpi

JPEG / PDF

9

Color 300

dpi

JPEG / PDF

 

Color 600

dpi

JPEG / PDF

 

B/W 100

dpi

TIFF / PDF

 

B/W 200

dpi

TIFF / PDF

 

B/W 300

dpi

TIFF / PDF

 

a Make sure you have put the memory card or USB Flash memory drive in the proper slot.

IMPORTANT

DO NOT take out the memory card or USB Flash memory drive while PHOTO CAPTURE is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.

61