You can place a logo or text into your document as a Watermark. You can select one of the template watermarks, data from your media cards or USB Flash memory drive, or scanned data.
Note
Fit to Page, Page Layout,
Ink Save Mode and Book Copy are not available with Watermark Copy.
Using a templatea Press (Copy). b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Watermark Copy. Press OK.
e
f Press a or b to choose Current Setting. Press OK.
g Press a or b to choose Template. Press OK.
h Change the settings from option on LCD if you need.
i If you do not want to change additional settings, press Black Start or
Color Start.
Making copies
Using media card or a USB Flash memory drivea Press (Copy). b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Watermark Copy. Press OK.
e Press d or c to choose On.
f Press a or b to choose Current Setting. Press OK.
g Insert a media card or USB Flash memory drive. Press a or b to choose Media.
h Press OK and then press d or c to choose the data you want to use for the watermark.
i Press OK and change any additional settings from the options shown on the LCD.
j If you do not want to change additional
settings, press Black Start or11 Color Start.
IMPORTANT
DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.
85