PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive

Setting your changes as the new default

You can save the print settings you use most often by setting them as the default settings. These settings will stay until you change them again.

a Press a or b to choose your new setting. Press OK.

Repeat this step for each setting you want to change.

b After changing the last setting, press

aor b to choose Set New Default. Press OK.

c Press 1 to choose Yes. d Press Stop/Exit.

Restoring all settings to the factory settings

You can restore all the settings you have changed to the factory settings. These settings will stay until you change them again.

a Press a or b to choose Factory Reset. Press OK.

b Press 1 to choose Yes.

c Press Stop/Exit.

Scan to a memory card or USB Flash memory drive

Entering Scan mode

When you want to scan to a memory card or USB Flash memory drive, press

(Scan).

The LCD shows:

 

Scan to E-mail

Scan a document

 

 

 

 

 

 

Scan to Image

directly to a media

 

 

 

 

 

 

Scan to OCR

card or USB

 

 

 

 

 

 

Scan to File

flash

 

 

 

 

 

 

Scan to Media

memory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SCAN

Select & Press OK

Press a or b to choose Scan to Media. Press OK.

If you are not connected to your computer only the Scan to Media selection will appear on the LCD.

(See Using the Scan key in the Software User’s Guide on the CD-ROM for details about the other menu options.)

12

105