Chapter 2

b Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

1

2

c Put the photo paper into the photo bypass tray and gently adjust the paper side guides to the paper.

Make sure the paper side guides touch the sides of the paper.

Check that the paper is flat in the tray.

Note

Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

Always make sure that the paper is not curled or wrinkled.

d When you have finished printing photos return the photo bypass tray to the Normal printing position. If you do not, you will get No Paper Fed errors when you use Letter or Legal size paper.

Squeeze the blue photo bypass tray release button (1) using your right index finger and thumb and pull the photo bypass tray back until it clicks (2).

1

2

14