PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive

e Repeat step d until you have entered all the image numbers that you want to print.

Note

•You can enter multiple numbers at one time by using the l key for a comma or the

# key for a hyphen. For example, Enter 1, l, 3, l, 6 to print images No.1, No.3 and No.6. Enter 1, #, 5 to print images No.1 to No.5.

•You can enter up to 12 characters (including commas) for the image numbers you want to print.

f After you have chosen all the image numbers, press OK again.

g Enter the number of copies you want using the dial pad.

h Do one of the following:

„Change the print settings. (See page 101.)

„If you do not want to change any settings, press Color Start to print.

Enhance Photos

You can edit and add effects to your photos and view them on the LCD before printing.

Note

•After adding each effect, you can enlarge the view of the image by pressing l. To go back to the original size, press l again.

•The Enhance Photos feature is supported by technology from Reallusion, Inc.

Auto Correct

Auto Correct is available for most photos. The machine decides the suitable effect for your photo.

a Make sure you have put the memory card or USB Flash memory drive in the proper slot.

Press (Photo Capture).

b Press a or b to choose Enhance Photos. Press OK.

c Press d or c to choose your photo.

Press OK.

 

d Press a or b to choose Auto Correct.

12

Press OK.

Note

If Remove Red-Eyeappears on the LCD, press # to attempt to remove red-eye from your photo.

e Press OK and a or b to increase or decrease the number of copies.

f Do one of the following:

„Press OK and change the print settings. (See page 101.)

„If you do not want to change any settings, press Color Start to print.

95