Press d or c to choose your photo. Press OK.
b
Do one of the following:
c Press d or c to choose your photo. Press OK.
d Press a or b to choose Monochrome. Press OK.
e Press OK and a or b to increase or decrease the number of copies.
f
Press a or b to choose Enhance Photos. Press OK.

PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive

Remove Red-Eye

The machine detects eyes in your photos and will attempt to remove red-eye from your photo.

Note

There are some cases when red-eye may not be removed.

•When the face is too small in the image.

•When the face is turning too far up, down, left or right.

a Make sure you have put the memory card or USB Flash memory drive in the proper slot.

Press (Photo Capture).

f Do one of the following:

„Press OK and change the print settings. (See page 101.)

„If you do not want to change any settings, press Color Start to print.

Monochrome

You can convert your photo to black & white.

a Make sure you have put the memory card or USB Flash memory drive in the proper slot.

Press (Photo Capture).

b Press a or b to choose Enhance Photos. Press OK.

c

d Press a or b to choose Remove Red-Eye. Press OK.

„ When Remove Red-Eye is

„ Press OK and change the print

 

settings. (See page 101.)

 

successful, the photo with the effect

„ If you do not want to change any

 

is shown. The adjusted part is shown

 

in a red frame.

settings, press Color Start to print.

12

 

 

„When Remove Red-Eye is unsuccessful,

Unable to Detect. is shown.

Press OK to go back to the previous level.

Note

Press # to try Remove Red-Eyeonce again.

e Press OK and a or b to increase or decrease the number of copies.

97