
If your
If you let the machine answer first, you will have to go to the machine so you can press Hook to send the call to the cordless handset.
Using remote codesFax Receive codeIf you answer a fax call on an extension telephone, you can tell your machine to receive it by dialing the Fax Receive Code
l5 1. Wait for the chirping sounds and then replace the handset. (See Easy Receive on page 44.)
If you answer a fax call at the external telephone connected to the EXT jack of the machine, you can make the machine receive the fax by pressing Black Start and choosing Receive.
Telephone Answer CodeIf you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (pseudo/double) ring after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T Ring off by pressing # 5 1 (make sure you press this between the rings).
If the machine answers a voice call and
Telephone Services and External devices
Changing the remote codesThe preset Fax Receive Code is l 5 1. The preset Telephone Answer Code is # 5 1. If you want to, you can replace them with your own codes.
a
b Press a or b to choose Fax. Press OK.
c Press a or b to choose Setup Receive. Press OK.
d Press a or b to choose Remote Codes.
e Press d or cto choose On (or Off). Press OK.
f Enter the new Fax Receive Code. | 7 |
Press OK. |
|
g Press a or b to choose Tel Answer: and enter the new Telephone Answer Code.
Press OK.
h Press Stop/Exit.
Note
•If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code and Telephone Answer Code to another three- digit code (such as # # # and 9 9 9).
•Remote Codes might not work with some telephone systems.
63