Chapter 12

How to scan to a memory card or USB Flash memory drive

You can scan black & white and color documents into a memory card or USB Flash memory drive. Black & white documents will be stored in PDF (*.PDF) or TIFF (*.TIF) file formats. Color documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is Color 150 dpi and the default file format is PDF. The machine automatically creates file names based on the current date. (For details, see Quick Setup Guide.) For example, the fifth image scanned on July 1, 2009 would be named 07010905.PDF. You can change the color and quality.

Quality

 

Selectable File

 

 

Format

Color 150

dpi

JPEG / PDF

Color 300

dpi

JPEG / PDF

Color 600

dpi

JPEG / PDF

B/W 200x100 dpi

TIFF / PDF

B/W 200 dpi

TIFF / PDF

a Make sure you have put the memory card or USB Flash memory drive in the proper slot.

IMPORTANT

DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.

b Load your document.

c Press (Scan).

d Press a or b to choose Scan to Media. Press OK.

106

e Do one of the following:

„To change the quality, press a or b to choose Quality.

Go to step f.

„Press Black Start or Color Start to start scanning without changing additional settings.

f Press d or c to choose

Color 150 dpi, Color 300 dpi, Color 600 dpi, B/W 200x100 dpi or B/W 200 dpi.

Press OK.

g Do one of the following:

„To change the file type, go to step h.

„Press Black Start or Color Start to start scanning without changing additional settings.

h Press a or b to choose File Type. Press d or c to choose JPEG, PDF or TIFF.

Press OK.

Note

If you chose color in the resolution setting, you cannot choose TIFF.

If you chose black & white in the resolution setting, you cannot choose JPEG.

i Do one of the following:

„To change the file name, go to step j.

„Press Black Start or Color Start to start scanning without changing additional settings.

j The file name is set automatically however, you can set a name of your choice using the dial pad.

Press a or b to choose File Name. Enter the new name. (See Entering Text on page 182.)

You can only change the first 6 digits. Press OK.