Press Menu.

Chapter 5

Delayed Batch Transmission (Black & White only)

Before sending the delayed faxes, your machine will help you economize by sorting all the faxes in the memory by destination and scheduled time. All delayed faxes that are scheduled to be sent at the same time to the same fax number will be sent as one fax to save transmission time.

a Press (Fax).

b Press a or b to choose Batch TX.

c Press d or c to choose On. Press OK.

d Press Stop/Exit.

Checking and canceling waiting jobs

You can check which jobs are still waiting in the memory to be sent and cancel a job.

(If there are no jobs, the LCD shows No Jobs Waiting.)

a

b Press a or b to choose Fax. Press OK.

c Press a or b to choose Remaining Jobs. Press OK.

Any waiting jobs appear on the LCD.

d Press a or b to scroll through the jobs and choose the job you want to cancel. Press OK.

e Do one of the following:

„To cancel, press 1 to choose Yes.

If you want to cancel another job go to step d.

„To exit without canceling, press 2 to choose No.

38

f Repeat steps dand e for each job you want to cancel.

g When you are finished, press Stop/Exit.

Setting your changes as the new default

You can save the fax settings for Fax Resolution, Contrast,

Real Time TX and Glass ScanSize you use most often by setting them as default. These settings will stay until you change them again.

a Press (Fax).

b Press a or b to choose your new setting you want to change, and then press

dor c to choose the new option. Press OK.

Repeat this step for each setting you want to change.

c After changing the last setting, press

aor b to choose Set New Default. Press OK.

d Press 1 to choose Yes. e Press Stop/Exit.